Panasonic PT-LB75VE - Wired Lan; Wireless Lan; Input Password; Network Control

NETWORK menu (PT-LB90NTE only)
Settings
E
NGLISH - 47
NETWORK menu
(PT-LB90NTE only)
Navigating through the MENU (
¨
page 29),
select NETWORK from the main menu and then
select the required item from the sub-menu.
6HWWKHVHOHFWHGLWHPZLWKŻŹEXWWRQV
z
Remote control Control panel
5HPDUNV
These items are set for network connection with a
z
computer. For details of the PJ Link and network,
see “NETWORK operation manual” in the CD-ROM
provided.
WIRED LAN
J
You can set a wired LAN.
WIRELESS LAN
J
You can set a wireless LAN.
1$0(&+$1*(
J
You can change the name of the projector.
INPUT PASSWORD
J
When checking the password for the network
connection, you must turn this function ON.
3$66:25'&+$1*(
J
You can change the password for the network
connection.
NETWORK CONTROL
J
When controlling the projector with a computer on
the network, you must turn this function ON.
LIVE MODE CUT IN
J
Set this function to ON to allow other users to
connect to live mode while the projector is operating
in the live mode of the network .
&20387(56($5&+
J
You can search for a computer on the network.
MULTI-LIVE
J
This function is available when a network input
signal is detected.
STATUS
J
You can display the status of the network setting.
INITIALIZE
J
You can reset the settings of the network to the
factory default settings.
5HPDUNV
When
z
PASSWORD in the SECURITY menu is
activated or the network setting is initialised, you
will be required to input the password.