Panasonic PT-LW375 - About Your Projector; Remote Control

ENGLISH - 23
About your projector
Remote control
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
8
18
1 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Input selection buttons (<COMPUTER 1> /
<COMPUTER 2>*
1
/ <HDMI> / <VIDEO> / <MEMORY
VIEWER/USB DISPLAY/NETWORK>*
2
)
Switches the input signal to project. (x page 42)
*1 The <COMPUTER 2> button is only for PT-LW375,
PT-LW335, PT-LB425, PT-LB385 and PT-LB355, it is
disabled for PT-LB305.
*2 The <MEMORY VIEWER/USB DISPLAY/NETWORK>
button is only for PT-LW375, PT-LW335, PT-LB425,
PT-LB385 and PT-LB355.
The <MEMORY VIEWER/USB DISPLAY> button is for
PT-LB305 and it is disabled.
3 <ENTER> button/asqw buttons
Used to navigate through the menu screen.
4 <MENU> button
Displays or hides the main menu. (x page 51)
When the sub menu is displayed, pressing it will return to
the previous screen.
5 <ASPECT> button
Switches the aspect ratio of the image.
6 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 47)
7 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 47)
8 <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 48)
9 <VOLUME +/-> buttons
Adjusts the volume of the built-in speaker or audio
output. (x page 48)
10 Remote control signal emitter
11 <AUTO SETUP> button
Executes Input search, Auto PC adj. and Auto Keystone
correction at the same time. (x page 45)
12 <INFO.> button
Displays the status of the projector. (x page 80)
13 <KEYSTONE> button
Corrects the distortion of the projected image.
(x page 46)
14 <LAMP> button
Switches the settings of [Lamp control].
(
Æ
pages 47, 61)
15 <P-TIMER> button
Operate the P-timer function. (x page 47)
16 <IMAGE> button
Switches the image mode.
( x pages 48, 58)
17 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a
bright surroundings.
( x pages 49, 60)
18 <MUTE> button
Used when temporarily turning off the audio.
(x page 48)
Chapter 1 Preparation - About your projector