Panasonic PT-LW376 - Page 55

ENGLISH - 55
[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] - 74
[COMPUTER1 INPUT SETTING] /
[COMPUTER INPUT SETTING]
[RGB/YPBPR] 74
[COMPUTER2 SELECT]
*1
[COMPUTER2 IN] 74
[PROJECTOR ID] [ALL] 74
[INITIAL START UP] [LAST MEMORY] 75
[PROJECTION METHOD] [AUTO] 75
[HIGH ALTITUDE MODE] [OFF] 75
[LAMP POWER] [NORMAL] 76
[ECO MANAGEMENT] - 76
[EMULATE] [OFF] 77
[FUNCTION BUTTON] - 78
[AUDIO SETTING] - 78
[TEST PATTERN] - 80
[FILTER COUNTER] - 80
[INITIALIZE ALL] - 81
*1 Not available for PT-LB306.
[SECURITY]
Sub-menu item Factory Default Page
[PASSWORD] [OFF] 82
[PASSWORD CHANGE] - 82
[TEXT DISPLAY] [OFF] 82
[TEXT CHANGE] - 83
[MENU LOCK] [OFF] 83
[MENU LOCK PASSWORD] - 83
[CONTROL DEVICE SETUP] - 83
[NETWORK]
Sub-menu item Factory default Page
[WIRED LAN] - 85
[PROJECTOR NAME] - 85
[ADMINISTRATOR ACCOUNT] - 86
[PJLink PASSWORD] - 86
[NETWORK CONTROL] - 86
[MEMORY VIEWER] - 87
[NETWORK STATUS] - 89
[INITIALIZE] - 89
Note
f Some items may not be adjustable or used for certain input signal formats. The menu items that cannot be adjusted or used are shown in
gray characters.
f Sub-menu items and factory default settings di󰀨er depending on the selected input.
Chapter 4 Settings - Menu navigation