Panasonic PT-MZ13K - Web Interface HTTPS Security Setup

Chapter 5 Operations — Web control function
ENGLISH - 175
[Https set up] page
Set this page when HTTPS (Hypertext Transfer Protocol Secure) communication encrypted with the SSL/TLS
protocol is to be performed between the computer and the projector while the web control function is used.
To perform the HTTPS communication, it is necessary to install the certicate for authentication into the projector.
Click [Detailed set up] → [Https set up].
1
2
3
4
5
6
1 [CRT Key generate]
Generates the CRT (Certicate) key.
The page to generate the CRT key is displayed by clicking
[Execute].
For details, refer to “Generating the CRT key” (x page 176).
2 [Self-signed Certicate]
[Generate]:
Generates the self-signed certicate by the projector.
The page to generate the self-signed certicate is displayed by
clicking [Execute].
For details, refer to “Generating the self-signed certicate”
(x page 180).
[Information]:
Displays the status of the self-signed certicate.
f [Not generated]: Self-signed certicate is not generated.
f [(host name)]: Self-signed certicate is generated and valid.
The host name registered in the self-signed certicate is
displayed.
f [Invalid (Reason: Server Certicate installed)]: The server
certicate is valid, so the generated self-signed certicate is
invalid.
Information of the generated self-signed certicate is displayed
by clicking [Conrm].
The generated self-signed certicate can be deleted by clicking
[Delete].
For details, refer to “Conrming the information of the self-
signed certicate” (x page 180).
3 [Server Certicate]
[Generate Certicate Signing Request]:
Generates signing request (Certicate Signing Request).
The page to generate the signing request is displayed by
clicking [Execute].
For details, refer to “Generating the signing request”
(x page 178).
[Server Certicate install]/[Intermediate Certicate install]:
Installs the server certicate and the intermediate certicate.
The certicate is installed into the projector by specifying the
certicate le and clicking [Execute].
For details, refer to “Installing the certicate” (x page 179).
[Information]:
Displays the status of the server certicate.
f [Invalid]: The server certicate is not installed. Or, the
current CRT key is different from the CRT key used for
requesting the installed server certicate.
f [(host name)]: The server certicate is installed and valid.
The host name registered in the server certicate is
displayed.
f [Expired]: Valid period of the server certicate has expired.
The host name registered in the server certicate is displayed
when the server certicate is installed and valid.
Information of the installed server certicate is displayed by
clicking [Conrm].
The installed server certicate and the intermediate certicate
can be deleted by clicking [Delete].
For details, refer to “Conrming the information of the server
certicate” (x page 179).
4 [Connection]
Sets the connection method to the projector.
f [HTTP]: Uses the HTTP communication. (Factory default
setting)
f [HTTPS]: Uses the HTTPS communication.
5 [HTTPS port]
Sets the port number to be used with the HTTPS
communication.
Allowed port number: 1 to 65535
Factory default setting: 443
6 [Set]
Enables the setting.
Note
f When the [Connection] setting is changed from [HTTPS] to [HTTP], the screen may not be displayed when the operation or update of the
web control screen is performed. In such case, delete the cache of the web browser.
f The [Crestron Connected(TM)] page cannot be operated when [Connection] is set to [HTTPS].
f Installation operation of the certicate may not be possible depending on the computer or web browser in use.