Panasonic PT-P1SDU - Projection Dimensions Calculation Methods

ENGLISH-69
Others
68-ENGLISH
Dimensions
<Units: mm (inch)>
54.0(2-1/8˝)
234.0(9-3/16˝)
170.5 (6-11/16 ˝)
188.0(7-3/8
˝
)
6.0
(-7/32
˝)
71.0(2-25/32
˝)
43.3
(1-11/16
˝)
NOTE:
B If 4:3 images are projected onto a 16:9 screen that
has been set using the projection distance for a
16:9 screen, the 4:3 images will overflow the
screen at the top and bottom. In such cases, set
“ASPECT” to “S4:3”. (Refer to page 47 for details.)
Projection dimensions calculation methods
If the screen size (diagonal) is SD (m), then the following formula is used to
calculate the projection distance for the wide lens position (LW) and the
projection distance for the telephoto lens position (LT).
SD
SW
4:3
LW/LT
H1
SH
*The values obtained from the formulas above are approximate.
For 16:9 aspect ratios, the following formula can be used to calculate the
projection distance.
LW=0.028xSD/0.0254-0.042
LT=0.033xSD/0.0254-0.043
Minimum Projection Distance
Maximum Projection Distance
LW=0.031xSD/0.0254-0.042
LT=0.036xSD/0.0254-0.043
Minimum Projection Distance
Maximum Projection Distance