Panasonic PT-RQ35K - Page 225

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 225
6) Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT] Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[FADE-IN] Sets the fade-in time.
[FADE-OUT] Sets the fade-out time.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING] Performs geometric adjustment using a computer.
[FREEZE] Freezes the projected image.
[COLOR] Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[LENS H SHIFT MSB]
*1
Coarsely adjusts the horizontal position of the lens.
[LENS H SHIFT LSB]
*1
Finely adjusts the horizontal position of the lens.
[LENS V SHIFT MSB]
*1
Coarsely adjusts the vertical position of the lens.
[LENS V SHIFT LSB]
*1
Finely adjusts the vertical position of the lens.
[LENS FOCUS MSB]
*1
Coarsely adjusts the focus position of the lens.
[LENS FOCUS LSB]
*1
Finely adjusts the focus position of the lens.
[LENS ZOOM MSB]
*1
Coarsely adjusts the zoom position of the lens.
[LENS ZOOM LSB]
*1
Finely adjusts the zoom position of the lens.
[ENABLE/DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No denition
*1 These items can be selected in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection lens
with the stepping motor is attached.
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
f Same item cannot be set for multiple channels, except for [NONE].
Note
f Assign each item of [LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB] to a channel together
with [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB]. These cannot be used when assigned to a
channel by itself.
f Assign each item of [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB] to a channel together with
[LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB]. These cannot be used when assigned to a
channel by itself.
f MSB: Most Signicant Byte
f LSB: Least Signicant Byte
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1) Press as to select [Art-Net].
2) Press the <ENTER> button.
f The [Art-Net] screen is displayed.
3) Press as to select [Art-Net STATUS].
4) Press the <ENTER> button.
f The [Art-Net STATUS] screen is displayed.