379 (14-29/32) 305 (12)
107 (4-7/32)
Model PT-VW430 PT-VX500
Power supply 100-240 V AC, 50/60 Hz
Power consumption 365 W (0.3 W when standby mode set to Eco*
1
, 11.5 W when standby mode set to Network.)
LCD panel
Panel size 15 mm (0.59 inches) diagonal (16:10 aspect ratio) 16 mm (0.63 inches) diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.18–1.90:1), manual focus, F 1.60–2.12, f 15.28–24.62 mm
Lamp 280 W x 1, lamp replacement cycle (lamp power: Normal/Eco): 2,500 hours/4,000 hours*²
Screen size (diagonal) 0.76–7.62 m (30–300 inch), 16:10 aspect ratio 0.76–7.62 m (30–300 inch), 4:3 aspect ratio
Brightness*³ 4,300 lm (lamp power: Normal) 5,000 lm (lamp power: Normal)
Center-to-corner uniformity*³ 85%
Contrast*³ 3,500:1 (full on/full off, lamp power: Normal, Iris: On) 4,000:1 (full on/full off, lamp power: Normal, Iris: On)
Resolution 1,280 x 800 pixels*⁴ 1,024 x 768 pixels*⁵
Scanning
frequency
HDMI f
H: 25–80 kHz, fV: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog)
f
H: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YP
B
P
R
(YC
B
C
R
)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video f
H: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +48° Vertical: +40°
Keystone correction range Vertical: ±30° (±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*
6
,
compatible with non-interlaced signals only, dot clock: 25 -146.25 MHz
COMPUTER IN 1
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
COMPUTER IN 2/MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN
RCA pin x 1 (Composite VIDEO)
S-VIDEO IN
Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO IN
RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1
M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2 (MIC IN)
M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT
M3 x 1 (L-R x 1) for output (variable)
SERIAL IN
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
Built-in speaker 4 cm round shape x 1, output power: 10.0 W (monaural)
Noise level 37 dB (lamp power: Normal), 29 dB (lamp power: Eco)
Cabinet materials Molded plastic
Dimensions (W × H × D) 379 x 107 x 305 mm (14.9” x 4.2” x 12.0”) (with legs at shortest position, not including protruding parts)
Weight Approximately 4.8 kg (10.6 lbs)
Operating environment Operating temperature: 0°C–40°C (32°F–104°F)*
7
, operating humidity: 20%-80% (no condensation)
Supplied accessories
Power cord x 1*
8
,
power cord holder x 1,
wireless remote control unit,
batteries (AAA/R03/LR03 type x 2),
carrying bag x 1,
computer cable (1.8 m, for VGA) x 1,
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)
Specifications
5
*1 When the Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
*2 The values given for the recommended lamp replacement cycles are maximum.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6 Compliant with VESA CVT-RB.
*7 When the ambient temperature is between 35 °C and 40 °C (95 °F and 104 °F), the lamp power should be set to Eco.
*8 Power cords available (x 2) for the PT-VW430EA/VX500EA.
Dimensions Terminals
unit: mm (inch)
To Next Page
Loading...
