Input menu
40
- ENGLISH
Settings
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
Press ▲▼ to select [System].1 )
Press ► or the <SELECT> button to 2 )
access the submenu.
Press ▲▼ to select the desired system.3 )
Attention
When the Input Search function is set to [On1] or
z
[On2] in the Auto setup function, the input signal will
be searched automatically.
The AV System Menu cannot be selected when
z
selecting RGB (Scart).
To Next Page
Loading...
