Panasonic PV-4601 A - 4.1.3.13. DISASSEMBLY; ASSEMBLY PROCEDURES OF CASSETTE UP ASSY

Fig. A6
4.1.3.13. DISASSEMBLY / ASSEMBLY PROCEDURES OF CASSETTE UP
ASS'Y
When reassembling, follow the steps in reverse order.
Step/Loc.
No.
Prior
Step
(s)
Part Fig.
No.
Remove Note
1 - Top Plate Ass'y K1 (S-1), 2(L-1) 3
2 - Wiper Arm L Unit K2 (S-2), (L-2) 1
3 2 Main Shaft Gear L K2 ------------- 1
4 - Wiper Arm R Unit K3 (S-3), (L-3) 1
5 2, 3, 4 Main Shaft Unit K3 ------------- 1
6 4 Cassette Door
Opener
K3 (L-4) -
7 1, 2,
3, 4, 5
Cassette Guide
Ass'y
K4 2(L-5) 2
8 1, 2,
3,4,
5, 7
Cassette Holder
Unit
K4 ------------- -
9 2, 4 Cassette Opener K4 Slide Rack
Ass'y
1
List of Abbreviations :
(S-1) = Screw(S-1); 2(L-1) = 2 Locking Clips(L-1)
Reference <Notes> in chart :
1. Alignment is necessary.
Refer to Alignment Procedure, Page 2-22 and 2-23.
Important Note :
2. As an ESD countermeasure, make sure the spring is in contact with the chassis as
shown in
Fig. K1.
3. As an ESD countermeasure, make sure the spring is in contact with the Top Cover
as shown in
Fig. K1.
104