Panasonic PV-C2541 - Page 24

Timer Programming using VCR Plus+P System
VCR Plus+ System is...
This feature allows you to set most items of a Timer Recording by simply entering a special
code number (PlusCode programming number) found in TV GUIDE and selected newspaper
TV listings.
Initial Setup...
In order to do Timer Programming using VCR Plus+, the initial Setup (Clock and
Channels) on page 8 to 11 must be done.
Channel Setup...
Since PlusCode numbers assigned to channels (found in TV Guide and selected
newspapers) may differ from channels in your viewing area, you'll need to enter your
local TV channel number for each corresponding Guide Channel. Once Channel Setup
is done. the saben local channel udi be selected when PlusCode numbers are used to
program this
Channel nae Propane VCR Plus+ Channel Setup
To complete step 4 right, make [For DSS / Cable Box connection only.]
a
loca!
channel
list
(see
At
first,
do
Channel
Setup
Preparations
left.
example
below).
Press
ACTION*
You
will
need
the
following:
1
to
display
MAIN
MENU
*
A
normal
TV
and/or
Cable
peal
:
station line up and the channel
numbers your receive them on.
1)Press AV4P to
* A list of Guide (VCR Plus+) select "CH."
channel numbers for stations you 2)Press ACTION to
receive (see TV Guide and display SET UP
selected newspapers.) CHANNEL screen.
1 Make a 3-column chart.
In the left column, write all station
names you receive. SET UP CHANNEL 1)Press AV to select
2 In the middle column, write each SUC aM VCR Plus+ CH SET
station’s Guide (VCR Plus+) Wear stom Dispuay-orr | UP.
number (see TV Guide, etc.). T PR: 2)Press > to display
3 In the right column, write the screen.
channe! number your TV A A A A
GUIDE CH RECEIVE CH up/down the GUIDE
> q -- CH column.
< EXAMPLE ONLY > 2)Press > to move
cursor to right column.
3)Press AV to change
the CABLE CH
number.
4)Press d to set VCR
To Make Corrections Plus+ channels.
Press AY and > move * Repeat step 4 until list
to error, then AV is complete.
change, or ADDIDLT to
erase number.
Press ACTION three times
to end the setup.
VOR Plus+ CH SET UP
GUIDE CH RECEIVE CH
For assistance, please call : 1-800-211-PANA(7262} or send e-mail to : consumerproducts @ panasonic.com