Panasonic PV-C2541 - Page 40

Warning and Instruction Displays
These displays will alert you to a missed operation or provide further instructions.
Caution
NO
CH
FOUND
PLEASE
CHECK
*
|f
no
active
channels
are
found
for
ANTENNA
CABLE
CONNECTION
THEN
CHANNEL
MEMORY...
PUSH
CH
UP
KEY
AGAIN
PLEASE SET CLOCK BEFORE * If you attempt to set or review a Timer
PROGRAMMING
Recording,
or
set
the
On-Timer
and
the
Clock
is not
set...
CHECK CASSETTE RECORD TAB * |f you press REC, and a cassette is inserted
with no record tab...
TO CANCEL TIMER REC HOLD DOWN | * If you press STOP during a Timer
STOP KEY FOR APPROX 3 SEC Recording...
NOC * |f you press PLAY, FF, REW, or REC
PLEASE INSER INSERT A CASSETTE without a cassette inserted...
REMOTE CONTROL IS SET ~ J elf you press POWER, ACTION, or PROG on
TO DSS/CABLE MODE the remote while in DSS or CABLE mode...
USE COMBO : COMBO KEY
VIDEO HEADS MAY NEED CLEANING | *if head cleaning becomes necessary while
PLEASE INSERT HEAD CLEANING playing back a tape...
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
VCR LOCK ACTIVATED * If you press a function button other than
STOP/EJECT or POWER while the unit is in
VCH Lock mode...
40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com