Note:
1. It is possible that the S-Tab SW. may not work correctly in Service
Position (2). (Recording can not be done). In this case, short the S-
Tab SW. Pins on the foil side of the Main C.B.A. to turn this SW.
on.
Fig. 7-2-2
2. Place the tape between the Cassette Up Ass'y and Main C.B.A. to
get a stability.
4.1.9.1.3. Service Position (3)
In Service Position (3), the DVD Decoder C.B.A. with Extension Cable (LSUA0034) X3 and
Connector Cable (IDE Cable) (Not supplied) can be performed.
Fig. 7-3-1
14