59
For Your Information
tinued)
STILL MODE
1
1) Press to select
“STILL MODE.”
2) Press SET
repeatedly for mode.
(See below)
2
Do steps 1 and 2 on page 57.
AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD: “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME: “FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AUTO” on some discs.
Selecting TV MODE
a
1) Press to select
“TV MODE.”
2) Press SET
repeatedly for mode.
(See below.)
b
Do steps 1 and 2 on page 57.
Pan & Scan : Wide screen video data is played in Pan
& Scan style (left and right of screen is
trimmed.)
• Video data not formatted in Pan & Scan
will play in letterbox style.
Letterbox : Wide screen video data is played in
Letterbox style (top and bottom of screen
has black margin).
Set the screen display style for wide-screen video
material playback.
• Pan & Scan (Factory preset)
• Letterbox
Set to reduce jitter in a displayed still picture or a
motion picture.
DVD MAIN MENU
SELECT :
SET : SET
END : ACTI ON
DI SC LANGUAGES
AUDIO OUTPUT
ST I LL MODE : F
I
LED
TV MODE : Letterbox
3
Press ACTION twice to exit this mode.
Press ACTION twice to exit this mode.
c
Example
*
Important:
If a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
(Factory preset)
DVD MAIN MENU
SELECT :
SET : SET
END : ACTI ON
DI SC LANGUAGES
AUDIO OUTPUT
STILL MODE
: F
I
ELD
TV MODE : Letterbox
To Next Page
Loading...
