Panasonic PV-DV103-K - Blank Search; Adjusting the Volume; Repeat Playback

31
VCR
R
1 Press PLAY for more than 5 seconds
in STOP mode.
• The Palmcorder will go into Repeat
Playback mode when the tape
reaches its end.
• The letter “R
” will appear in the
EVF and LCD monitor.
2 Turn the Palmcorder OFF to exit the
Repeat Playback mode.
1PLAY
EVF/LCD
Playback Your Recordings
1, 2
VOLUME
1 Set POWER to VCR.
2 Press MENU to display the VCR
FUNCTIONS menu screen.
3 Rotate JOG KEY to select
PLAYBACK FUNCTIONS , then
press JOG KEY to display the
PLAYBACK FUNCTIONS menu
screen.
4 Rotate JOG KEY to select BLANK
SEARCH in the VCR PLAY MODE
menu. (Menu OSD: p. 61)
5 Press JOG KEY to select ON.
• “BLANK” will appear on the screen.
3, 4, 5
JOG KEY
1POWER
Blank Search
You can go directly to a blank portion of
tape and start recording exactly where you
left off.
Repeat Playback
Adjusting the Volume
2MENU
EVF/LCD
EVF/LCD
1 Slide VOLUME to adjust the volume
of the built-in speaker in PLAY mode.
• The volume setting screen appears.
2 Press “T” to increase the volume.
Press “W” to decrease the volume.
DV103-K.p30-33.p65 2003/06/11, 13:1831