11
Before Use
Quick Guide
Insert the Battery Pack
Insert Cassette
1Insert the Battery Pack and slide
it up until it locks with a click.
1Press LCD-OPEN to unlock the LCD
monitor, and swing it fully open.
3Slide TAPE EJECT to open
the Cassette Compartment
Cover.
Protection Film
Note
• Remove the
Protection Film before use.
Before you begin
• Charge the Battery. (p. 14)
2Set POWER to VCR or
CAMERA.
12
These Palmcorders are equipped with the Easy Cassette Eject System so
it is easy to insert or remove tapes, even when on a tripod. (p. 7)
4Insert a cassette record tab
up, window side facing out.
• Make sure the record tab
is closed. (p. 7)
5Press PUSH TO CLOSE mark
to close the Cassette
Compartment Cover.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
15
To Next Page
Loading...
