Panasonic PV-GS250 - Recording the Contents of Other Equipment

Edit mode
47
LSQT0862
pFor more information, refer to the operating
instructions for your TV set and recorder.
pWhen you do not need functional indications or
date and time indications, press the [OSD]
button on the remote control for no indication.
(When you connect the Camcorder and a
recorder with the DV cable, these indications
may not appear.)
x
When neither image nor sound from
the Camcorder is output to the TV set
pCheck that the plugs are inserted as far as they
go.
pCheck the connected terminal.
pWhen no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/¤], set to
[OUT]. (
-64-)
Recording the contents of other
equipment
You can dub the contents of other equipment to a
DV cassette or card, and can record TV
programs.
pSet to Tape Playback Mode.
1 Connect the Camcorder and other
equipment.
pConnect the Camcorder and other equipment
by using theAV cable .
pIf the recorder has an S-Video terminal, then
also connect an S-Video cable  (optional). It
allows you to record clearer images.
2 Set [BASIC] >> [AV JACK] >> [IN/OUT].
(Camcorder)
3 Turn the power on and start playback.
(Other equipment)
4 Start recording. (Camcorder)
Recording on a tape:
5 Set [ADVANCE] >> [REC STDBY] >> [ON].
(Camcorder) (Only when the Tape
Recording Mode)
pThe icon appears.
Move the joystick up to start recording.
Or, while pressing the [
qREC] button on the
remote controller, press the [
] button.
Recording on a card:
Press the [PHOTO SHOT] button.
6 Move the joystick of the Camcorder down or
press the [w] button on the remote
controller to stop recording.
pWhile analog input pictures are being
recorded on a tape or when the Camcorder is
in recording standby mode, the photoshot
recording is disabled.
7 Stop playback. (Other equipment)
pDo not plug or unplug the cable during recording
or the recording may not be completed properly.
pCarefully read the operating instructions for your
TV set and video equipment.
pBy operating as [SETUP] or [ADVANCE] >>
[AUDIO REC], set the recording sound mode
([12bit] or [16bit]). (
-64-)
pIf a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
pIf a picture containing a copyright protection
signal (copy guard) is recorded, the message
“COPY PROTECTED” appears when recording
it on a tape and the picture is distorted by
mosaic-like patterns at playback.
pWhen wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
pIf, during recording, an operation such as cue
playback or slow motion playback is performed
on external equipment, mosaic-like patterns
may appear on the picture at playback.
pIf pictures are recorded when TV broadcasting
signals are weak or pictures are affected by
noise, they may be distorted or may not even be
played back.
pIf both the S-Video cable and the AV cable are
connected, S-video signal are input
preferentially.

[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
AV/
S-VIDEO
STOP
V
/REW
STILL ADV
VOL
¥REC A.DUB
PLAY
PAU SE
FF/
W
STILL ADV
T
W