EasyManua.ls Logo

Panasonic PV-GS34 - Copying to DVD Recorder;VCR; Connecting with DV Cable

Panasonic PV-GS34
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
Editing Mode
A/VMIC
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
1
2
(PV-GS35 Only)
Copying onto a DVD Recorder or
a VCR ( Dubbing)
Pictures recorded by the Camcorder can be stored
on a DVD-RAM or other such media. Refer to the
instructions for the recorder.
Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM or cassette in
the DVD Recorder or VCR.
1 Connect the Camcorder and the Recorder.
Connecting with the AV Cable
Connect the Camcorder and the Recorder by
using the AV Cable
1
.
If the recorder has an S-Video terminal,
then also connect an S-Video Cable
2
(not
supplied). An S-Video connection allows you to
copy a higher quality image.
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
2 Turn on the Camcorder and set to Tape
Playback Mode.
3 Select the input channel on the TV set and
recorder.
4 Move the Joystick Control
[]
35
to start playback.
The image and sound are
reproduced.
5 Start recording.
6 Move the Joystick Control []
35
to stop
playback.
7 Stop recording.
For more information, refer to the operating
instructions for your TV set and recorder.
When you do not need functional indications or date
and time indications, press the [OSD] Button
42
on the Remote Control for no indication. (When you
connect the Camcorder and a recorder with the DV
cable, these indications may not appear.) (PV-GS35
only)
When neither image nor sound from the
Camcorder is output to the TV set
Check that the plugs are inserted as far as they
go.
Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
Player/Recorder:
2 Insert the Cassette and set to Tape
Playback Mode.
1
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal,
and using a 4-pin to 4-pin DV Interface Cable
PV-DDC9-K (optional)
1
, high quality images and
sounds can be dubbed in the digital mode.
Set to Tape Playback Mode (Player/Recorder)
1 Connect the Camcorder and digital video
equipment with the DV cable.
[One-Touch Navigation icon]

Table of Contents

Related product manuals