46
Editing Mode
Recorder:
4 Set [ ADVANCE] >> [ REC STDBY] >>
[YES], then move the Joystick Control [▲]
to select [ ].
• For other notes concerning this item, see page 69.
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
To Stop Dubbing
Press the [ ] Button
52
or the [ ■ ] Button
53
, or
move the Joystick Control [▲] to select [ ] again.
To Cancel the Standby for Recording
When the Camcorder is standby for recording,
move the Joystick Control [▼] and select the [ ].
PC Connection With DV Interface
Cable
A video clip can be transferred directly to your PC
(Personal Computer) via a DV Interface Cable
(Optional) using products and software from a number
of video editing software companies.
Using products from video editing software companies
allows you to capture and edit video clips using the DV
Interface.
Our DVC being OHCI compliant should
have no problem working with any OHCI
compliant Firewire Card/video - Editing
software package.
• Personal Computer must be equipped with an DV
Terminal.
• During Camcorder playback, do not disconnect the
DV Interface Cable or turn the Camcorder off as this
may cause a PC hang-up error.
• 1394 (i.LINK) Interface must conform to OHCI (Open
Host Controller Interface Specification).
52
45
55
53
Player:
3 Press the [►] Button
55
to start playback.
Or, while pressing the [● REC] Button
45
,
press the [PLAY] Button
55
on the Remote
Control.
• Recording starts.
SP 3h59m59s29f
12:34:56AM
JAN 2 2005
To Next Page
Loading...
