48
With a PC
For Windows
OS:
IBM PC/AT compatible personal computer with
preinstalled;
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium ll/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more
• For Windows Me/2000/XP users, the USB
equipment operates with the driver installed as
standard in OS.
For Macintosh
OS:
Mac OS X v 10.1 – X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
• The USB equipment operates with the driver
installed as standard in OS.
Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable only if you have Windows 98SE OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1 Turn on the personal computer and start up
Windows.
2 Insert the CD-ROM into the personal
computer’s CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
3 Click the [USB Driver].
• The set up program starts running.
Installing the USB Driver (For Windows
98SE Only) For Using the Built-in SD
Drive Feature
5 Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, Click [Finish].
6 After the USB Driver is installed, please
restart your computer.
[PV-GS35: Supplied]
For PV-GS34/PV-GS35
[PV-GS34: Supplied]
• If you have direct dial-up connection capability to the
Internet, please download the USB Driver.
• Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable (not supplied) only if you have Windows 98SE
OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
For PV-GS19/PV-GS31
• Reboot the computer to finish installing USB
driver.
• Installation continues after the computer reboots
if you selected additional software.
• A message indicating a conflict between versions
may be displayed during the installation. This will not
cause a problem. Simply click [Yes] to proceed with
the installation.
1 In order to download and install the USB
Driver, go to
http://www.panasonic.ca/english/
customercare/downloads.asp
4 Click [Restart] if the [InstallShield] dialogue
appears.
• Do not remove the CD-ROM.
2 Click [software & drivers].
3 Select [Mini DV Camcorders] in the Product
Category menu.
4 Click [USB Driver version 1.00].
5 Decompress the downloaded data.
6 Double click icon.
• The set up program starts running.
To Next Page
Loading...
