Panasonic PV-GS400 - Rapidfire Consecutive Photoshot

Recording Mode
30
Selecting the Size of Photoshot Images
1 Tape Recording Mode:
Set [TAPE RECORDING MENU] >> [CARD]
>> [PICTURE SIZE] >> [1280k960] or
[640k480].
Card Recording Mode:
Set [CARD RECORDING MENU] >> [CARD]
>> [PICTURE SIZE] >> [2288k1728],
[1600k1200], [1280k960] or [640k480].
Selecting the Quality of Photoshot images
1 Set [TAPE RECORDING MENU],
[TAPE PLAYBACK MENU] or
[CARD RECORDING MENU] >> [CARD] >>
[PICT QUALITY] >> a desired image quality.
MENU
STILL
FADE
ENTER
(16)
MENU
STILL
FADE
ENTER
(16)
ª RapidFire Consecutive Photoshot
The still pictures can be recorded on a Card at
regular intervals.
≥Available only with [640k480] picture size.
1 Set [CARD RECORDING MENU] >> [CARD]
>> [BURST MODE] >> [ON].
≥The [ ] Indication appears.
2 Keep pressing the [PHOTO SHOT] Button
(52).
≥You can also activate RapidFire Consecutive
Photoshot Function after pressing the
[PHOTO SHOT] Button halfway. In this case,
if the Image Stabilizer Function (
-32-) is set to
[ON], the Image Stabilizer Function works
more effectively.
≥When [ON] is selected, the still pictures can
be recorded in approximately 0.7 second
intervals until the [PHOTO SHOT] Button is
released or 10 pictures are recorded. (You
cannot use the RapidFire Consecutive
Photoshot if the shutter speed is set to 1/2,
1/4, 1/8 or 1/15.)
≥For other notes concerning this item, see
-75-.
MENU
STILL
FADE
ENTER
(16)
PHOTO
SHOT
(52)
PV-GS400Eng.book 30 ページ ２００４年６月４日 金曜日 午後３時１７分