Panasonic PV-GS400 - Page 43

Recording Mode
43
ª Picture-in-Picture Mode
You can display a sub-screen (still picture) inside
the screen.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [P-IN-P].
2 Aim the Camcorder at the scene you want
to capture and press the [P-IN-P] Button
(12) to insert a small still picture.
≥A small still picture is displayed in a normal
picture.
≥If the [P-IN-P] Button is pressed again, the
small still picture is cleared.
≥For other notes concerning this item, see
-79-.
MENU
STILL
FADE
ENTER
(16)
MULTI/
P-IN-P
(12)
ª Wipe Mode and Mix Mode
Wipe Mode:
Like drawing a curtain, the still picture of the last
recorded scene gradually changes to the moving
image of a new scene.
Mix Mode:
While the moving image of a new scene fades in,
the still image of the last recorded scene
gradually fades out.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [WIPE] or [MIX].
≥The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button (47)
to start recording.
3 Press the Recording Start/Stop Button (47)
to pause the recording.
≥The last scene is stored in memory. The
[WIPE] or [MIX] Indication changes to [B]
or [C].
4 Press the Recording Start/Stop Button (47)
to restart the recording.
≥The last image of the previous scene
gradually changes to the new scene.
≥For other notes concerning this item, see
-79-.
WIPE
WIPE
WIPE
MIX
MIX
MIX
MENU
STILL
FADE
ENTER
(16)
(47)
PV-GS400Eng.book 43 ページ ２００４年６月４日 金曜日 午後３時１７分