EasyManua.ls Logo

Panasonic PV-GS400 - SD Viewer Software Usage

Panasonic PV-GS400
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
With a PC
65
Connecting the Camcorder to a personal
computer
1 Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
2 Set [CAMERA] or [PLAYBACK] >>
[USB FUNCTION] >> [MOTION DV].
It enters MotionDV STUDIO Mode.
3 Connect the Camcorder to the personal
computer with USB Connection Cable.
4 Select [Start] >> [All Programs (Programs)]
>> [Panasonic] >>
[MotionDV STUDIO 5.1E LE for DV] >>
[MotionDV STUDIO].
Using the MotionDV STUDIO for Windows, a
variety of visual effects can be added and titles
can be created.
You cannot record a video edited by the PC
onto the Tape in the Camcorder.
With DV Cable
(optional)
OS:
Windows Me/2000/XP
1 Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
2 Connect the Camcorder to the personal
computer with DV Connection Cable.
3 Start MotionDV STUDIO 5.1E LE.
You can record the video edited by the PC onto
the Tape in the Camcorder.
MENU
STILL
FADE
ENTER
(16)
DV
Using the SD Viewer
ª Operating environment
OS:
IBM PC/AT compatible personal computer with
pre-installed
Microsoft Windows XP Home Edition/
Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium III 450 MHz or higher
Celeron 400 MHz or higher (including compatible
CPU)
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
(1024k768 pixels or more is recommended)
8 MB or more video memory
(3D Accelerator recommended, 16 MB or more
video memory recommended)
RAM:
64 MB or more (128 MB or more is
recommended) (Windows 98SE/Me)
128 MB or more (256 MB or more is
recommended) (Windows 2000/XP)
Free hard disk space:
300 MB
Interface:
USB
Necessary software:
Internet Explorer 5.0 or later
DirectX 8.1 or later
Windows Media Player 6.4 or later
Other requirements:
Mouse
ª Installation of SD Viewer
1 Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
2 Click the [SD Viewer].
If a message that indicates the absence of
DirectX 8.1 or later is displayed, install
DirectX first.
PV-GS400Eng.book 65 ージ 2004年6月4日 金曜日 午後3時17分

Table of Contents

Other manuals for Panasonic PV-GS400

Related product manuals