Editmode
Edit mode Copying onto a DVD recorder or a
Recording from a tape onto a card
(PV-GS85 only)
Still pictures can be recorded on a memory card
from scenes that have already been recorded on
a cassette.
• Set to Tape Playback Mode.
• Insert a tape which already has recorded
contents and a card.
1 Start playback.
VCR (Dubbing)
Pictures recorded by the Camcorder can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
• Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM or cassette in
the DVD recorder or VCR.
1 Connect the Camcorder and the recorder.
Connecting with the AV cable
2 Pause at the scene you wish to record, and
press the Photoshot button [_].
• Audio will not be recorded.
• The size of still pictures recorded on a card
becomes _ (16:9) or [] (4:3).
• If you set [TV ASPECT] >> [4:3], black bands
are added to the top and bottom of the picture
when wide pictures are recorded to the card.
(-:_5-)
• If you press the Photoshot button [_] without
pausing, blurred pictures may be recorded.
[VIDEOIN] _,_
• Connect the Camcorder and the recorder by
using the AV cable O.
Connecting with the optional DV cable:
PV-DDCg/PV-DDC9-K (Only for equipment
with a DV terminal)
2 Turn on the Camcorder and set to Tape
Playback Mode.
3 Select the input channel on the TV set and
recorder.
4 Move the joystick up to select the [1_/11]
icon to start playback. (Player)
• The image and sound are reproduced.
5 Start recording. (Recorder)
6 Stop recording. (Recorder)
7 Move the joystick down to select the [11]
icon to stop playback. (Player)
4_
LSQT1121
To Next Page
Loading...
