and Circuit Board Layout Notes, for Mark "PT."
5. DISASSEMBLY/ASSEMBLY PROCEDURES
5.1. CABINET SECTION
5.1.1. DISASSEMBLY FLOWCHART
This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order
to gain access to item (s) to be serviced. When reassembling, perform the step (s) in the reverse
order. Bend, route and dress the wires as they were originally.
Fig. D1
Note:
1. When removing the cabinet, work with care so as not to break the
Locking Tabs.
2. Place a cloth or some other soft material under the P.C. Boards or
Unit to prevent damage.
3. When reinstalling, ensure that the connectors are connected and
electrical components have not been damaged.
4. Do not supply power to the unit during disassembly and
reassembly.
5.1.2. Disassembly Method
5.2. MECHANISM SECTION
5.2.1. Disassembly Method
29
To Next Page
Loading...
