15
6.2. Doctor Mode
6.2.1. Doctor Mode Table 1
To enter into Doctor Mode for
checking of various items and
displaying EEPROM and firmware
version.
Note: The micro-processor
version as shown is an example.
It will be revise when there is an
updates.
FL Display sequence
Display 1 > 2
Doctor Mode In any mode:
1. Press and hold [ ] on main
unit follow by [4] and [7] on
remote control.
To exit, press [TAPE/OFF] on
main uint.
(Display 1)
Version Display
(DEC)
Checksum
(HEX)
Item FL display Key operation
Mode name Description
(a) If there is NO EEPROM header
string OR
(b) If there is no EEPROM ( no data is
received by micro-processor) [NO] is
displayed.
If the version of the EEPROM does not
match or not working properly [NG] is
display.
(Display 2)
Checksum : (Condition 1)
Version Display
(DEC)
Check sum
(HEX)
Checksum : (Condition 2)
If the EEPROM version matches,
checksum [YYYY] is displayed.
The Checksum of EEPROM and
firmware version will be display for 2
sec.
Checksum : (Condition 3)
To Next Page
Loading...
