Remote control only
Remote control only
When the CD finishes playing, the MD will also stop
automatically.
news
Recording stops after “UTOC
Writing” flashes.
¡ Open the CD lid with the handle tilted down.
Each time you press it, the display on the
display will switch.
¡ Do not open the CD lid immediately after inserting the
CD and closing the CD lid, or while playing or pausing.
The CD may come off the turntable and scratch the
CD.
please
Select “LP
MODE” ÿ Press [ENTER]
"TR-MARKING" is displayed and one track
mark is attached.
¡ When you record an MP3, it automatically becomes an analog recording.
ÿ Tilt
ÿ Tilt
push
push
Manually add
track marks
push
Stop on the way
Pause
Press during
recording
See information
such as remaining time
recording
Press and hold until
"HIGH-SPEED" is displayed
Press
Press
to start recording
For high-speed recording
Select LP mode
ÿ Press [ENTER]
¡ Press again to resume. ¡ The
recorded sound is interrupted.
¡ A track mark is attached.
¡ You cannot pause or add track
marks while recording MP3s.
2
Four
1
3
Five
Ru (Synchro recording sound)
27
Record on D
C
M
D _
Choose "CD"
Press
Press again to return to the
original display.
Every time you tilt
(A left page)
¡ The recording level is set automatically. Changing the volume or sound
quality does not affect the recording. ¡ Monaural recording is not
possible for a long time with this unit.
To record your favorite song immediately
(Okake recording) Press [• / h -HI-SPEED
CD MD] during playback. If you record from the beginning
of the song to the last song, it will stop automatically. If
you pause playback and then record, the recording will
start from that position. To record only one song, select
"1-REC?" In the recording aiming for one song, press
[ENTER] (page 30), and then [• / h] while playing your
favorite song. -Press [HI-SPEED CD MD].
ÿ LP MODE OFF
ÿ ÿ ÿ
LP4 MODE ÿ ÿ LP2 MODE
RQT6953
Machine Translated by Google
To Next Page
Loading...
