Panasonic S-200PE1E8A - Remote Controller Servicing Functions; Test Run Function

7
7
7-7. Remote Controller Servicing Functions
• Theremotecontrollerincludesanumberofservicingfunctions.Usetheseasneededfortestrunsandinspections.
List of Servicing Functions
Functions Description Button operation Reset operation Unit status
Testrun
Operationwithforced
thermostatON
Pressandholdthe
buttonfor4
secondsorlonger.
Pressthe

button.
Currentoperationis
maintained.
Sensor
temperature
display
Temperaturedisplay
fromeachsensor
Pressandholdthe
and 
buttonsfor4secondsorlonger.
Servicing
checkdisplay
Alarmhistorydisplay
Pressandholdthe
and 
buttonsfor4secondsorlonger.
Simple
settings
Filterlifetime,operating
modepriority,central
controladdress,and
othersettings
Pressandholdthe
and 
buttonsfor4secondsorlonger.
Whensettings
aremadefroma
remotecontroller,
theindoorunit
wherethatremote
controlleris
connectedstops.
Detailed
settings
Systemaddress,indoor
unitaddress,central
controladdress,and
othersettings
Pressandholdthe
, and
buttonsfor4secondsorlonger.
Automatic
address
Automaticaddress
settingbasedon
commandfromthe
wiredremotecontroller
Pressandholdthe
andthe
timeroperation buttonsfor4
secondsorlonger.
Automaticreset
Entiresystem
stops.
Address
change
Changeofindoorunit
address
Pressandholdthe
andthe
timeroperation buttonsfor4
secondsorlonger.
Pressthe 
button.
7-8. Test Run Function
OperatestheunitwiththethermostatforcedON.
<Procedure>
1
Pressandholdthe buttonfor4secondsor
longer.
2
“TEST”appearsontheremotecontrollerLCD
display(Fig.7-3).
3
Startoperation.
4
Pressthe buttontoreturntonormalremote
controllerdisplay.
Fig. 7-3
CZ-RTC2
2
3
1
4
7-14
SM830194-04_Single_BigPAC.indb 14 2014/11/14 14:38:38