Panasonic S-224ME1E5 - Page 63

63
CZ-RTC5B (High-spec wired remote controller)
1 Keep pressing the
, and buttons
simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel. Page [ ] Confirm
20:30 (THU)
2 Press the or button to see each menu.
If you wish to see the next screen instantly, press the
or button.
Select “7. Simple settings” on the LCD display and press the
button.
Maintenance func
5. Sensor info.
6. Servicing check
8. Detailed settings
Sel. Page [ ] Confirm
20:30 (THU)
7. Simple settings
3 The “Simple settings” screen appears on the LCD display.
Select the “Unit no.” by pressing the
or
button for changes.
Simple settings
Unit no. Code no. Set data
01
ALL 0001
Sel. Next
20:30 (THU)
4 Select the “Code no.” by pressing the
or
button.
Change the “Code no.” by pressing the
or
button.
Simple settings
Unit no. Code no. Set data
1000ALL
Sel. Next
20:30 (THU)
0E
CZ-RTC5B
5
Select the “Set data” by pressing the
or
button.
Select one of the “Set data” by pressing the or
button.
Then press the button.
Simple settings
Unit no. Code no. Set data
3-1
Sel.
20:30 (THU)
0E 0001
[ ] Confirm
6 Select the “Unit no.” by pressing the
or
button
and press the
button.
The “Exit simple settings and restart?” (Simple setting-end)
screen appears on the LCD display.
Select “YES” and press the
button.
Simple settings
Unit no. Code no. Set data
ALL
Sel. Next
20:30 (THU)
01 0002
Exit simple settings
and restart?
NOYES
20:30 (THU)
START
[ ]
00_341136_2WAY_Eng.indb 63 2022/9/19 9:27:37