111
11.6.9 INSTALLATION OF DECORATIVE PANEL
The decorative panel has its installation direction. Confirm the direction by displaying the piping side.
1. Remove the air inlet grill from the decorative panel.
2. Remove the corner cover in 4 corner places.
Pull hook of corner cover as direction
○
1, at same
time remove it by sliding out in direction
○
2.
Corner cover
Decorative panel
Hook
1
2
3. Fix the hanger (2 pieces) of the decorative panel
to the indoor unit.
There is direction information at decorative panel
[PIPING SIDE] indication meaning the direction of
piping side.
4. Adjust between decorative panel fixing hole and
indoor unit screw hole.
5. Fix decorative panel with 4 screws with already fix
at paper model for installation.
Before installing the decorative panel, always remove
the paper template
Hinge
Air inlet grill
* Hang the hinge on the hole of decorative panel.
(The direction of the installation is free.)
Caution
Install certainly the decorative panel.
Cool air leakage causes sweating. Water drops fall.
To Next Page
Loading...
