18
External diameter mm
Drain hose
Length mm 650 650
Fin material Aluminium (Pre Coat) Aluminium (Pre Coat)
Fin Type Slit Fin Slit Fin
Row x Stage x FPI 2 x 15 x 21 2 x 15 x 21
Indoor Heat
Exchanger
Size (W x H x L) 810.0 x 315.0 x 25.4 810.0 x 315.0 x 25.4
Fin material Aluminium (Pre Coat) Aluminium (Pre Coat)
Fin Type Slit Fin Slit Fin
Row x Stage x FPI 1 x 4 x 21 1 x 4 x 21
Sub Heat
Exchanger
Size (W x H x L) 810.0 x 84.5 x 12.7 810.0 x 84.5 x 12.7
Material Polypropylene Polypropylene
Air Filter
Type One-Touch One-Touch
Power Supply Indoor Power Supply Indoor Power Supply
Length m (ft) - -
Power cord
Core x Diameter mm
2
- -
Thermostat Electronic Control Electronic Control
Maximum °C 32 32
Cool
Minimum °C 21 21
Maximum °C 27 27
Indoor Operation
Range
Heat
Minimum °C 16 16
1. Cooling capacities are based on indoor temperature of 27°C Dry Bulb (80.6°F Dry Bulb), 19.0°C Wet Bulb (66.2°F Wet Bulb) and outdoor air
temperature of 35°C Dry Bulb (95°F Dry Bulb), 24°C Wet Bulb (75.2°F Wet Bulb).
2. Heating capacities are based on indoor temperature of 20°C Dry Bulb (68.0°F Dry Bulb) and outdoor air temperature of 7°C Dry Bulb (44.6°F
Dry Bulb), 6°C Wet Bulb (42.8°F Wet Bulb).
3. Heating low temperature capacity, input power and COP measured at 230V, indoor temperature 20°C, outdoor 2/1°C.
4. Heating extreme low temperature capacity, input power and COP measured at 230V, indoor temperature 20°C, outdoor -7/-8°C.
5. Specifications are subjected to change without prior notice for future improvement.
To Next Page
Loading...
