207
Install the decorative panel by matching the
directional arrow UP for the decorative panel as
shown in the illustration to the right.
Install the case by matching it
with the directional arrow.
CZ-RD1
HEA T
MOD E
FAN
UP
COO L
Decorative panel
Directional arrow
UP
Hole
Case
Earth screw
Please note the installation direction.
11.17.3 OPERATING PROCEDURE
1. Enable or disable cooling/heating selector.
Choose SW
○
1 or
○
2.
By choosing
○
1 , the set operations are turned OFF, and by choosing
○
2 , the set operations are turned ON.
2. Choose either the fan operation or the cooling/heating operation.
Choose SW
○
3 or
○
4.
Choose
○
3 for the fan operation, and choose
○
4 for the cooling/heating operations.
By choosing
○
3 , the wired controller indicates priority to the fan operation.
To Next Page
Loading...
