32
(4) How to disengage the electrical component cover.
Remove the hooks on the left side of the electrical component box and open the cover
toward you supporting the right side cover.
When installing the cover, carry out in reverse order.
Hooks
Groove
Electrical
component
cover
Electrical
component
cover
Hooks
When installing the cover,
fit in the groove of the cover
in this area.
(5) Make wiring.
Refer to the instructions manual of optional parts as well.
● Install the solenoid valve controller (optional parts) on the wall.
Important:
Set up the controller so that the maintenance can be carried out easily.
Solenoid valve controller
Solenoid valve controller
01_330200_EU_Eng.indb 32 2021/1/13 10:23:07
To Next Page
Loading...
