41
■ Wiring procedures
Follow the wiring procedure below for terminal connections.
(1) Remove the wire clamps from the outdoor unit.
Wire clamp
Loosen two screws to remove.
(2) Secure the wires and cables with the wire clamps.
(3) Install the wire clamps on the outdoor unit.
Wire clamp
Screw
Wires and cables
Outdoor unit
■ Check after completing installation
Check the signals to make sure the unit operates properly with the use of an external input device.
00_341136_2WAY_Eng.indb 41 2022/9/19 9:27:29
To Next Page
Loading...
