18
Item Unit Outdoor Unit
Power Source (Phase, Voltage, Cycle)
Ø Single
V 230
Hz 50
Input Power
Condition Cooling Heating Heat Recovery
kW 2.09 1.82 3.15
Maximum Input Power For Heatpump System kW 4.90
Starting Current A 10.1
Running Current
Condition Cooling Heating Heat Recovery
A 10.1 8.7 15.0
Maximum Current For Heatpump System A 21.6
Power Factor
Power factor means total figure of compressor and
outdoor fan motor.
Condition Cooling Heating Heat Recovery
% 90 91 91
Power Cord
Number of core -
Length m (ft) -
Thermostat Electronic Control
Protection Device Electronic Control
Note:
** The sound pressure and sound power level is measured with distance 1.0m from the unit and height at 1.5m.
(Test carry out for cooling at ambient 35°C DB and Water Out 7°C, heating at ambient 7°C DB / 6°C WB and
water out 55°C)
*** The sound power level is measured with accordance to EN12102 under conditions of the EN14825.
To Next Page
Loading...
