295
27. Disassembly and Assembly Instructions (S-71WF3E)
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
27.1 Indoor Electronic Controller Removal Procedures
1 Remove the 1 screw of the Rain Cover.
Screw
Rain Cover
Fig. 1
2 Remove the 5 screws of the Control Board Cover.
Screw
Control Board Cover
Fig. 2
3 Detach all connectors from Electronic Controller.
Release the 11
connectors of the
Electronic Controller
Fig. 3
4 Remove the Electronic Controller from 2 Hook.
Release the 2
hook of the
Electronic
Controller
Fig. 4
To Next Page
Loading...
