34
■ When connecting to the optional parts
< Connecting to Schedule Timer >
Read the Installation Instructions of Schedule Timer before installation.
1. Connect the inter-unit control wiring and Schedule timer communications wiring together.
2. Thread Schedule timer power wiring through the wire saddle and connect it to T10 connector.
< Connecting to other optional parts >
Connect to each connector of the indoor unit control PCB as shown below.
NOTE:
Be sure to thread the wire through the wire saddle and connect to the connectors.
Schedule timer
power wiring
Schedule timer
communications
wiring
Inter-unit control
wiring
T10
FAN DRIVE
T10
EXCT
Wire saddle
01_350221_Eng.indb 34 2023/3/17 10:01:14
To Next Page
Loading...
