Panasonic S-73MF3E5AN - Operating the Wired Remote Controller (CZ-RTC6 Series)

50
10-4. Operating the Wired Remote Controller (CZ-RTC6 series)
Stop the system before performing these steps.
How to set the external static pressure
1. Keep pressing the
, and buttons simultaneously
for 4 or more seconds.
The “Maintenance func” screen appears on the LCD
display.
Maintenance func
XX / XX
[ ][ ]
ECONAVI
nanoeX
RC. setting mode
2. Press the or button to see each menu.
Select “Detailed settings” on the LCD display and press the
button.
The “Detailed settings” screen appears on the LCD display.
3. Select the “Unit no.” by pressing the
or button.
After selecting “Unit no.”, press the
button and proceed to
Step 4.
4. Select the “Code no.” by pressing the
or button.
Change the “Code no.” to “0000B0” by pressing the or
button (or keeping it pressed).
After selecting “Code no.”, press the button and proceed to
Step 5.
5. Select the “Set data” by pressing the
or button.
Select one of the “Set data” among “0001” – “0010” according
to the desired external static pressure setting by pressing the
or button.
After selecting “Set data”, press the
button. (If setting
continuously, follow the procedures from Step 3.)
(See Table 10-4.)
When setting to auto airflow volume control:
Select the setting data to “-002”.
After selecting “Set data”, press the
button. (If setting
continuously, follow the procedures from Step 3.)
Maintenance func
XX / XX
[ ][ ]
Simple settings
Detailed settings
Auto address
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
000010
Set data 00010005
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
0000B0
Set data 0001-001
]
Detailed settings
[ ]
Unit no.
Code no.
1-1
0000B0
Set data 00010001
]
Confrm
[ ]
Detailed settings
[ ]
Unit no.
Code no.
1-1
0000B0
Set data 0001-002
]
Confrm
[ ]
Black
01_350221_Eng.indb 50 2023/3/17 10:01:18