Slide 57
Panel SOS Circuit (6 blinks shutdown caused by A20/SC20/SN20 removal)
5.SOS Detect Circuit Explanation (24)
SOS7_SC2: 0V
SOS8_SS
SOS6_SC1: 0V
The stability of SS is affected when connection between
connectors A20 and SC20 or SN20 is opened causing the TV to
shutdown and the power LED to blink 6 times.
The power LED blinks 6 times because the system detects 0.8V of
the panel SOS signal at designated timing periods.
Panel SOS
Blink 6 times
IC8000
checking
0.8V
SOS_DCC: 0V
FFC_OFF_DET:0V
Start time point
TC-P**S60 series (All models)
To Next Page
Loading...
