Panasonic SA-HT530GCP - Service Mode Table; DVD;CD Self-Diagnosis Error Code Description

15.3. Service Mode Table 1
Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit.
Player Remote controller
unit
Usage
button
0 Error code display (Refer to the item, 15.4. DVD Error Code Description)
5 Tilt adjustment
6 Area number and broadcasting system check
7 MICRO - P & Firmware Version.
DISPLAY DVD laser drive current check
3 CD laser drive current check
PAUSE Writing of laser drive current value after replacement of optical pickup
(Do use this function only when optical pickup is replaced.)
Initialization of the player (factory setting is restored.)
Used after replacement of micro-computer and its peripherals and printed circuit board.
15.4. DVD/CD Self-Diagnosis Error Code Description
Error Code Meaning Details
U. H. Error
U11 Focus servo failure
H01 Tray loading failure
H02 Spindle servo failure (Spindle servo, DSC, SP motor, CLV servo failure)
H03 Traverse motor failure
H04 Tracking servo error
H05 Seek timeout failure
DSC system
F500 DSC failure DSC stops due to servo failure.
(Startup, focus failure, etc.)
F501 DSC not Ready failure Communication failure between DSC and system computer
(No communication because DSC does not move)
F502 DSC Time out failure See F500.
F503 DSC communication failure Communication failure (Result failure occurs after communication
command is transmitted.)
F505 DSC Attention Error See F500.
F506 Invalid media Disc is placed upside down; TOC is unreadable or invalid disc is inserted.
ODC system
F600 Unable to obtain control information due to form
recovery failure
Operation stops because navigation data cannot be obtained due to form
recovery system failure.
F601 Illegal sector ID requested Operation stops because access of illegal ID data is requested.
F602 Unable to obtain LEAD IN due to form recovery
failure
Unable to read LEAD IN data
F603 Unable to obtain KEY DET due to form recovery
failure
Unable to obtain CSS data
F610 ODC failure No permission of command issue
F611 No CRC OK appearing for a certain time Unable to obtain seek address at CD system
F612 No CRC OK appearing for a certain time Unable to obtain ID data at DVD system
Disc Code
F103 Ilegal highlight position Disc standard is possibly illegal when highlight is displayed.
IIC Error
F4FF Forced initialization failure (Time out)
Micro-computer Error
F700 MBX overflow When replying a message to Disc Manager
F701 Unable to complete a message command A message is issued before replying to Disc Manager.
F702 Change in a message command A message is issued before replying to Disc Manager.
F880 Unsuitable task number When a message arrives from not existing task
F890 A message is sent during AV task transmission During transmission of a message to AV task
F891 Unable to transmit a message to AV task When transmission of a message to AV task starts
F893 FROM altered
F894 EEPROM failure
F8A0 Unsuitable message command When transmission of a message to AV task starts
24
SA-HT530GCP