Panasonic SA-HT530GCP - Page 26

Item Operational Condition
and Key Function
Details Display To Exit Mode
User initialization While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the number button
on the remote
controller unit.
User initialization
The user setting recovers the factory
setting.
“INITIALIZED” None
Region display While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the number
button, “6” on the
remote controller unit.
Region display __w
*1
_x
*2
y
*3
_zzz
*4
*1
: Region number
*2
: N; no PAL/P; PAL
*3
: N; NTSC/6; PAL60
*4
: Panel computer jumper information
Automatically exits
the mode after five
seconds.
Firm version
display
While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the number
button, “7” on the
remote controller unit.
Firm version display rrr
*1
_xx
*2
y
*3
zzz
*4
*1
: Panel computer release number
*2
: System computer generation
*3
: System computer model type
*4
: System computer release number
Automatically exits
the mode after five
seconds.
Region and firm
version display
While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the number
button, “8” on the
remote controller unit.
Region and firm version display _r
*1
__xx
*2
y
*3
zzz
*4
*1
: Region number
*2
: System computer generation
*3
: System computer model type
*4
: System computer release number
Automatically exits
the mode after five
seconds.
Usage time 1 While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the
button on
the remote controller
unit.
Usage time 1
Laser usage time
Measures each for DVD and CD
respectively.
T1_1234_5678
The numbers in the left show usage time
for DVD laser and those in the right for
CD laser. The four-digit number is shown
by the ten hours in the decimal digit. The
number after 0000 is 9999.
Automatically exits
the mode after five
seconds.
Usage time 1
reset
While the usage time 1
is displayed, press and
hold down the
button on the player
and the
button on
the remote controller
unit.
Usage time 1 reset
Laser usage time‘
Resets both for DVD and CD at once.
T1_0000_0000 Automatically exits
the mode after five
seconds.
Usage time 2 While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the
button on
the remote controller
unit.
Usage time 2
Spindle motor usage time
T2_1234
The four-digit number is shown by the ten
hours in the decimal digit. The number
after 0000 is 9999.
Automatically exits
the mode after five
seconds.
Usage time 2
reset
While the usage time 2
is displayed, press and
hold down the
button on the player
and the
button on
the remote controller
unit.
Usage time 2 reset
Spindle motor usage time
T2_0000 Automatically exits
the mode after five
seconds.
Communication
error display
While the player is
stopped and no disc is
inserted, press and
hold down the
button on the player
and the MENU button
on the remote
controller unit.
Displays frequency of communication
errors between system computer firm
IC and mechanical computer IC during
DVD module.
ERR_00_/30 Automatically exits
the mode after five
seconds.
26
SA-HT530GCP