Error
Code
Diagnosis Contents Description of error Automatic FL Display Remarks
F600 Access failure to
management information
caused by demodulation
error
Operation stopped because navigation
data is not accessible caused by the
demodulation defect
Press [ n STOP] on main
unit for next error
F601 Indeterminate sector ID
requested
Operation stopped caused by the
request to access abnormal ID data
Press [ n STOP] on main
unit for next error
F602 Access failure to LEAD-IN
caused by demodulation
error
LEAD IN data unreadable Press [ n STOP] on main
unit for next error
F603 Access failure to KEYDET
caused by demodulation
error
Access failure to CSS data of disc Press [ n STOP] on main
unit for next error
F610 ODC abnormality No permission for command execution Press [ n STOP] on main
unit for next error
F611 No CRC OK for a specific
time (CD)
Access failure to seek address in CD
series
Press [ n STOP] on main
unit for next error
F612 No CRC OK for a specific
time (DVD)
Access failure to ID data in DVD series Press [ n STOP] on main
unit for next error
F620 Laser safeguard: high
temperature condition
High temperature of the laser guide unit
(OPU unit)
Press [ n STOP] on main
unit for next error
F621 Laser safeguard: circuit
failure condition
Circuitry failure of the laser guide unit
(OPU unit)
Press [ n STOP] on main
unit for next error
F103 Illegal highlight Position Big possibility of disc specification
violation during highlight display
Press [ n STOP] on main
unit for next error
F4FF Force initialize failure (time
out)
Timeout when force initialization fails Press [ n STOP] on main
unit for next error
F700 MBX overflow When replying message to disc manager Press [ n STOP] on main
unit for next error
F701 Message command does
not end
Next message is sent before replying to
disc manager
Press [ n STOP] on main
unit for next error
F702 Message command
changes
Message is changed before it is sent as
a reply to disc manager
Press [ n STOP] on main
unit for next error
F880 Task number is not
appropriate
Message coming from a non-existing
task
Press [ n STOP] on main
unit for next error
F890 Sending message when
message is being sent to
AV task
Sending message to AV task Press [ n STOP] on main
unit for next error
F891 Message couldn’t be sent
to AV task
Begin sending message to AV task Press [ n STOP] on main
unit for next error
33
SA-HT640WP / SA-HT640WPC
To Next Page
Loading...
