Step 2 Remove 1 screw and support piece.
10.16.6. Disassembly of the Slide Plate (L)
& (R) and Change Lever
Step 1 Press the claw and push the Slide Plate (L) up.
Step 2 Remove slide plate (L) & (R) and change lever as arrow
shown.
10.17. Assembly of Tray Assembly
Step 1 Rotate cam gear anti-clockwise. Align at position (C) as
marking on gear with arrow.
Step 2 Make sure drive gear (A) at vertical position.
44
SA-HT640WP / SA-HT640WPC
To Next Page
Loading...
