Panasonic SA-HT940PC - Disassembly of the Traverse Unit

10.17.2. Disassembly of the Close Lock
Gear
· Follow (Step 1) to (Step 3) of Item 10.5.
Step 1 Remove 1 screw.
Step 2 Hook close lock spring to claw (a).
Step 3 Rotate close lock gear to direction of arrow, press claw
(b) and pull out close lock gear.
10.17.3. Disassembly of the Tray Motor
P.C.B. and Sensor P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.5.
Step 1 Remove 2 screws.
Step 2 Release 4 claws at Tray Motor P.C.B. and Sensor
P.C.B.
10.18. Disassembly of the Traverse
Unit
· Follow the Item 10.7.
Step 1 Rotate cam gear anti-clockwise. (Align at position (A) as
marking on gear with arrow)
Step 2 Flip the base mecha unit in vertical position.
Step 3 Press upward (a), push backward (b) and press to left
(c) to release CD traverse unit.
10.18.1. Disassembly of the Pulley Gear
Step 1 Remove of the loading belt.
Step 2 Flip the base mecha.
39
SA-HT940P / SA-HT940PC