Panasonic SA-HT940PC - Assembly of Tray Assembly

Step 2 Remove 1 screw and support piece.
10.18.6. Disassembly of the Slide Plate (L)
& (R) and Change Lever
Step 1 Press the claw and push the Slide Plate (L) up.
Step 2 Remove slide plate (L) & (R) and change lever as arrow
shown.
10.19. Assembly of Tray Assembly
Step 1 Rotate cam gear anti-clockwise. Align at position (C) as
marking on gear with arrow.
Step 2 Make sure drive gear (A) at vertical position.
41
SA-HT940P / SA-HT940PC