Step 18: Remove all the screws.
Step 19: Remove all the screws.
Step 20: Detach the connector CN503 and remove the
transformer.
·
Checking for the Transformer, Amplifier and AC Inlet P.C.B.
Step 21: Place the Transformer P.C.B., Amplifier
P.C.B. and the AC Inlet P.C.B. as shown for
checking.
Steps 22: Release the AC Inlet P.C.B. as arrow
shown.
·
Checking for the Power and Speaker Interface P.C.B.
10
SB-WA870EB / SB-WA870EG
To Next Page
Loading...
