42
Step 2 : Release the 5P Wire from the slots.
Caution : During assembling, ensure the 5P wire is
dressed into the slots of the Front Panel Block.
Step 3 : Remove 1 screw.
Step 4 : Release 1 catch.
Step 5 : Lift up the Interlock Switch P.C.B as shown.
Caution 1 : During assembling, place the Interlock Switch
P.C.B. under the rib.
Caution 2 : During assembling, ensure the Interlock Switch
P.C.B. is fully catched and properly seated on the locator.
To Next Page
Loading...
