59
10.21. Disassembly of Lower Guide
Rail
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Bottom Ornament”
Step 1 : Release the 5P Wire from the groove.
Caution : During assembling, dressed the 5P wire into the
ribs of the Front Panel Block.
Step 2 : Remove 4 screws.
Step 3 : Release 2 catches.
Caution : During assembling, ensure the Lower Guide Rail
is fully catched to the Front Panel Block.
Step 4 : Remove the Lower Guide Rail.
To Next Page
Loading...
