66
Step 3 : Remove the Button P.C.B..
Caution: During assembling, ensure the Button P.C.B. is
fully fixed into the ribs and guide by sequence from 1 to 4.
10.26. Disassembly of Button Orna-
ment
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel P.C.B. & Button Ornament
Unit”
• Refer to “Disassembly of Button P.C.B.”
Step 1 : Lift up the Button Ornament in order of sequences (1)
to (2) as shown.
Step 2 : Remove the Button Ornament.
Caution : During assembling, align the holes of the button
ornament with the guides of the Top Ornament & press
together.
To Next Page
Loading...
