69
Step 4 : Desolder points on the solder side of the CD Servo
P. C. B ..
Step 5 : Upset the CD Servo P.C.B..
Step 6 : Lift up the Connector Cover.
Caution : Do not use strong force as it may damage the
connector cover.
Step 7 : Detach 24P FFC at the connector (CN7001) from the
CD Servo P.C.B..
Step 8 : Attach short pin to the 24P FFC of the Traverse
Assembly.
Step 9 : Remove the CD Servo P.C.B..
To Next Page
Loading...
