87
Step 8 : Remove 3 screws.
Step 9 : Slightly lift up the CD Mechanism.
Step 10 : Detach 30P FFC at the connector (CN6006) on the
Main P.C.B..
Step 11 : Remove the CD Mechanism.
Step 12 : Remove 4 screws.
Step 13 : Lift up the 14P FFC.
Caution : The 14P FFC is pasted onto the SMPS Unit using
a double sided tape. During assembling, replace with new
one if torn.
To Next Page
Loading...
